 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 8-Channel LCD and Camera EMI Filter Array with ESD Protection CM1408-08DE Features * * * * * * * * Eight channels of EMI filtering with integrated ESD protection Pi-style EMI filters in a capacitor-resistorcapacitor (C-R-C) network 15kV ESD protection on each channel (IEC 61000-4-2 Level 4, contact discharge) 30kV ESD protection on each channel (HBM) Greater than -35dB attenuation (typical) at 1GHz TDFN packaging with 0.5mm lead pitch: * 16-lead TDFN, 4.0mm x 1.60mm Increased robustness against vertical impacts during manufacturing process Lead-free finishing Applications * * * * * * LCD and Camera data lines in mobile handsets I/O port protection for mobile handsets, notebook computers, PDAs etc. EMI filtering for data ports in cell phones, PDAs or notebook computers. Wireless handsets Handheld PCs/PDAs LCD and camera modules Block Diagram (c)2010 SCILLC. All rights reserved. April 2010 Rev. 2 Publication Order Number: CM1408-08DE/D CM1408-08DE PIN DESCRIPTIONS DEVICE PIN(s) 1 2 3 4 5 6 7 8 GND PAD NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 GND DESCRIPTION Filter + ESD Channel 1 Filter + ESD Channel 2 Filter + ESD Channel 3 Filter + ESD Channel 4 Filter + ESD Channel 5 Filter + ESD Channel 6 Filter + ESD Channel 7 Filter + ESD Channel 8 Device Ground DEVICE PIN(s) 16 15 14 13 12 11 10 9 NAME FILTER1 FILTER2 FILTER3 FILTER4 FILTER5 FILTER6 FILTER7 FILTER8 DESCRIPTION Filter + ESD Channel 1 Filter + ESD Channel 2 Filter + ESD Channel 3 Filter + ESD Channel 4 Filter + ESD Channel 5 Filter + ESD Channel 6 Filter + ESD Channel 7 Filter + ESD Channel 8 - Rev. 2 | Page 2 of 12 | www.onsemi.com CM1408-08DE Ordering Information PART NUMBERING INFORMATION Lead-free Finish Pins 16 Package TDFN-16 Ordering Part Number CM1408-08DE 1 Part Marking N088E Note 1: Parts are shipped in Tape & Reel form unless otherwise specified. Specifications ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Range DC Power per Resistor DC Package Power Rating RATING -65 to +150 100 500 UNITS C mW mW STANDARD OPERATING CONDITIONS PARAMETER Operating Temperature Range RATING -40 to +85 UNITS C Rev. 2 | Page 3 of 12 | www.onsemi.com CM1408-08DE ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE1) SYMBOL R CTOTAL C PARAMETER Resistance Total Channel Capacitance At 2.5VDC Reverse Bias, 1MHz, 30mVAC At 2.5VDC Reverse Bias, 1MHz, 30mVAC IDIODE=10A VDIODE= 3.3V ILOAD = 10mA ILOAD = -10mA Note 2 30 15 kV kV 5.6 -1.5 CONDITIONS MIN 80 14 TYP 100 17 MAX 120 22 UNITS pF Capacitance C 8.5 pF VDIODE ILEAK VSIG Standoff Voltage Diode Leakage Current (reverse bias) Signal Clamp Voltage Positive Clamp Negative Clamp In-system ESD Withstand Voltage a) Human Body Model, MIL-STD-883, Method 3015 b) Contact Discharge per IEC 61000-42 Level 4 Dynamic Resistance Positive Negative Cut-off Frequency ZSOURCE=50, ZLOAD=50 6.0 0.1 1.0 V A 6.8 -0.8 9.0 -0.4 V V VESD RDYN 2.3 0.9 Channel R = 100, Channel CSINGLE = 8.5pF MHz f C 200 Note 1: TA=25 unless otherwise specified. C Note 2: ESD applied to input and output pins with respect to GND, one at a time. Rev. 2 | Page 4 of 12 | www.onsemi.com CM1408-08DE Performance Information Typical EMI Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 1. Insertion Loss vs. Frequency (Filter 1 Input - Pin 1 to Pin 16) Figure 2. Insertion Loss vs. Frequency (Filter 2 Input - Pin 2 to Pin 15) Rev. 2 | Page 5 of 12 | www.onsemi.com CM1408-08DE Performance Information (cont'd) Typical EMI Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 3. Insertion Loss vs. Frequency (Filter 3 Input - Pin 3 to Pin 14) Figure 4. Insertion Loss vs. Frequency (Filter 4 Input - Pin 4 to Pin 13) Rev. 2 | Page 6 of 12 | www.onsemi.com CM1408-08DE Performance Information (cont'd) Typical EMI Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 5. Insertion Loss vs. Frequency (Filter 5 Input - Pin 5 to Pin 12) Figure 6. Insertion Loss vs. Frequency (Filter 6 Input - Pin 6 to Pin 11) Rev. 2 | Page 7 of 12 | www.onsemi.com CM1408-08DE Performance Information (cont'd) Typical EMI Filter Performance (TA=25 DC Bias=0V, 50 Ohm Environment) C, Figure 7. Insertion Loss vs. Frequency (Filter 7 Input - Pin 7 to Pin 10) Figure 8. Insertion Loss vs. Frequency (Filter 8 Input - Pin 8 to Pin 9) Rev. 2 | Page 8 of 12 | www.onsemi.com CM1408-08DE Performance Information (cont'd) Typical Diode Capacitance vs. Input Voltage Figure 9. Filter Capacitance vs. Input Voltage (normalized to capacitance at 2.5VDC and 25 C) Rev. 2 | Page 9 of 12 | www.onsemi.com CM1408-08DE Mechanical Details TDFN-16EEP Mechanical Specifications The CM1408-08DE is supplied in a 16-lead, 0.5mm pitch TDFN package with Exposed End Pads (EEP). Dimensions are presented below. PACKAGE DIMENSIONS Package JEDEC No. Leads Dim. Min A A3 b D D2 E E2 e K L M # per tape and reel 0.20 0.20 0.30 0.25 REF 3000 pieces 0.40 0.20 3.90 3.10 1.50 0.30 0.70 Millimeters Nom 0.75 0.20 REF 0.25 4.00 3.20 1.60 0.40 0.50 BSC 0.008 0.008 0.010 0.012 0.30 4.10 3.30 1.70 0.50 Max 0.80 Min 0.028 TDFN MO-229C | 16 Inches Nom 0.030 Max 0.031 0.008 REF 0.008 0.153 0.122 0.059 0.012 0.010 0.157 0.126 0.063 0.016 0.012 0.161 0.130 0.067 0.020 0.020 BSC 0.010 REF Controlling dimension: millimeters Dimensions for 16-Lead, 0.5mm pitch TDFN package with Exposed End Pads (EEP) This package is compliant with JEDEC standard MO-229C with the exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as called out in the table above. | Rev. 2 | Page 10 of 12 | www.onsemi.com CM1408-08DE Tape and Reel Specifications PACKAGE SIZE (mm) 4.00 X 1.60 X 0.75 POCKET SIZE (mm) B0 X A0 X K0 4.30 X 1.90 X 1.20 TAPE WIDTH W 12mm REEL DIAMETER 178mm (7") QTY PER REEL 3000 PART NUMBER CM1408-08DE P0 4mm P1 4mm Rev. 2 | Page 11 of 12 | www.onsemi.com CM1408-08DE ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION FULFILLMENT: LITERATURE FULFILLMENT Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: Phone 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: Fax 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: Email orderlit@onsemi.com Support: N. American Technical Support 800-282-9855 Toll Free USA/Canada Technical Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5773-3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Rev. 2 | Page 12 of 12 | www.onsemi.com |
Price & Availability of CM1408-08DE
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |